Ditch the cardboard six-pack and customize your own wood beer caddy to tow your brews in style. This six-pack carrier is complete with a wall-mounted bottle opener so you can enjoy a cold one as soon as you reach your destination.
Wood Beer Caddy
Photo: Cameron OdenVideo of the Day
Things You’ll Need
-
¼ " Pine Lattice
-
¾ " Self Tapping Screws
-
Brad Nailer
-
Wood Stain
-
Tape Measure
-
¾ " Dowel
-
Miter Saw
-
Wood Glue
-
1 ¼ " Brad Nails
-
Nylon String
-
220 Grit Sand Paper
-
Wall Mounted Bottle Opener
-
¾ " Brad Nails
-
¾ " Pine Board
Cutting and Assembling The Beer Caddy
Step 1
Materials layout.
Photo: Cameron OdenUsing your miter saw, measure and cut the following pieces to length:
A (2) – ¼ " x 2 ½" x 6" B – ¼ " x 2 ½" x 9" C – ¾ " x 9 ½" D (4) – ¼ " x 1 ¼ " x 10 ½" E (2) – ¼ " x 2 ½" x 10 ½" F – ¾ " x 6" x 9" G (2) – ¾ " x 6" x 12"
Step 2
Measuring for angle.
Photo: Cameron OdenTake your two 12" "G" pieces and mark 7" up from the bottom on both sides and 1 ⅛" from center on each side on top
Step 3
Completing your angle.
Photo: Cameron OdenConnect your two marks to determine the angle.
Step 4
Making miter cuts.
Photo: Cameron OdenMatch your miter saw to the angle and make your cuts.
Step 5
Notching wood on miter saw.
Photo: Cameron OdenNotch halfway down on the center of your two "A" pieces and make two notches in your "B" piece halfway at 3" and 6" so they can fit together.
Step 6
Checking the fitment.
Photo: Cameron OdenBe sure to check your fitment — this is what will hold your beer in place.
Step 7
Drilling a ¾" hole for the handle.
Photo: Cameron OdenUsing a ¾" Forstner bit, drill a hole 1" down from the top of your two "G" pieces being careful to only drill approximately ½" in and not piercing through the other side.
Step 8
Attaching the side piece.
Photo: Cameron OdenApply a thin bead of wood glue to the first 12" "G" piece and attach to "F" (the base) with 1 ¼" brad nails.
Step 9
Attaching opposite side piece.
Photo: Cameron OdenApply a small amount of glue and insert your ¾" dowel into the side you just attached.
Step 10
Sides attached with wood glue and nails.
Photo: Cameron OdenApply a small amount of glue to the remaining side. Insert the dowel and secure the base with 1 ¼" brad nails.
Step 11
Glueing the divider in place.
Photo: Cameron OdenTake your notched "A" and "B" pieces and apply glue to the joints and the bottom being careful to align it in your completed base.
Step 12
Attaching the wood slats on the outside.
Photo: Cameron OdenTake one of your "D" pieces and apply a small amount of glue to both sides and fasten with a ¾" nail on both sides. Repeat on the other side.
Step 13
Measuring equal distance between slats.
Photo: Cameron OdenUsing your tape measure, mark the following "E" and "D" pieces ¾" apart. Glue and fasten with ¾" nails.
Step 14
Removing rough edges.
Photo: Cameron OdenSand any rough edges with 220 grit sand paper.
Step 15
Finished assembly.
Photo: Cameron OdenAssembly is complete!
Finishing Touches
Step 1
Choosing wood finish.
Photo: Cameron OdenWipe the wood clean with a damp cloth. Let dry and choose your finish. Minwax Early American was used in this project.
Step 2
Applying stain
Photo: Cameron OdenApply stain evenly, following the directions on the can. Make sure to get inside and cover all the surfaces.
Step 3
Attaching wall-mounted bottle opener.
Photo: Cameron OdenUsing self tapping ¾" screws, attach a wall-mounted bottle opener. I found mine at my local bottle shop.
Step 4
Wrapping nylon handle.
Photo: Cameron OdenTake your nylon string and begin neatly wrapping the handle. This is optional, but a nice addition.
Step 5
Adding nylon sting to the handle.
Photo: Cameron OdenOnce you reach the end, cut and tie it off.
Step 6
Completed wooden beer caddy.
Photo: Cameron OdenPick up some beer from your local bottle shop and enjoy your work.
Step 7
Wooden beer caddy in two finishes.
Photo: Cameron OdenNow that you've mastered the art of making beer caddies, make one for a friend. Experiment with different finishes — the one on the left has a charred finish for a rustic look.
Step 8
Beer caddy details.
Photo: Cameron OdenUse details that contrast for a striking look.